Leveller GT-250DK · GT-275DK · GT-300DK 

Prevents backlash during use.

Strong blade with reinforcements both at the top and at the back of the blade. 

The lower reinforcement at the rear is designed so that you can reverse with the leveller without turning the blade, and any excess material, for example, when you come to an asphalt road, you will be able to reverse over and the leveller will press and distribute the material out into the road.

With the 3-point suspension on Fransgård's leveller, the lift arms can be mounted at 2 different heights to fit most tractors. If the lifting arms are mounted in the lower hole on one side and the upper hole on the other side, the blade will have a horizontal cutting angle of approximately 7 degrees.

The top bar attachment has both 2 fixed holes and an elongated slot, where you can advantageously mount the top bar bolt when, for example, levelling roads, as the leveller can better follow the terrain and you achieve a better end result.

Reinforced ends on the blade of the leveller, which are also prepared for mounting the side flap and snow blade.

Reversible wear steel bolts on with 16mm steel bolts grade 12.9. 

The leveller comes as standard with large wheels that are stepless adjustable via a spindle. The wheels can turn 360 degrees, so you can reverse with the leveller without turning the blade.

Support legs are easily placed in the holder, so you always have them with you when you need to park the leveller again.

The leveller can be mechanically offset adjusted to the right or left side.

The locking bolt is mounted without using tools. All locking bolts are galvanised.

The blade and the hydraulic cylinder on the boom are assembled with a strong 75 mm main bolt. 

The heavy-duty turntable on the blade is bolted together and has a replaceable PETP plastic wear disc and lubrication nipples to avoid wear in the turntable. 

The leveller is fitted as standard with reversible smooth/toothed wear steel. You can have your leveller delivered with a smooth or toothed wear steel at no extra cost if this is specified when ordering the leveller.

The leveller can also be fitted later with one of the other types of wear steel.

A strong blade cylinder with 45 mm stick ensures that the blade is kept stable.

The cylinder is well protected on top of the boom.

The GT-DK leveller can be hydraulically turned up to 244 degrees.

3-point suspension is standard Cat. II

Heavy duty cylinder hinge in special steel provides stable operation and long life.

All GT-DK levellers are prepared for the installation of hydraulic offset adjustment, item no. 2528.

The leveller is fitted with a holder for the hydraulic hoses as standard.